How-to guide · 5 min read
How to Clean Car Wheels Properly
Brake dust, iron fallout and tyre shine, in the right order. The routine we use in the studio.
By the Cleanazfk studio team, Ravenhall
Wheels are the dirtiest part of any car. Every time you brake, the pads shed dust full of iron, and it builds up on the face and barrel of the wheel. Left too long, it gets harder to remove and starts to dull the finish. Clean the wheels first, before the paint, so dirty water never splashes onto panels you've already washed.
What you need
- The Wheely Good Wheel Cleaner
- Deep Purple Fallout iron remover
- Midnight Rubber Tyre Gel and a Tyre Pro Applicator
- A soft wheel brush
- A hose or pressure washer
How to clean your wheels, step by step
- Make sure the wheels are cool. Never clean hot wheels or brakes. Wait until they're cool to touch and work out of direct sun.
- One wheel at a time. Rinse the wheel to knock off loose dirt.
- Spray the wheel cleaner. Spray The Wheely Good Wheel Cleaner over the face, spokes and barrel.
- Wait 30 to 60 seconds. That's all it needs to break down brake dust and road grime. Don't let it dry.
- Agitate with a wheel brush. Work the face, between the spokes, the barrel and around the wheel nuts.
- Rinse thoroughly, then move on to the next wheel.
- Remove iron fallout. Every few washes, or when the wheels look dull after cleaning, spray Deep Purple Fallout on, leave it 2 to 3 minutes and watch it turn purple where it dissolves iron. Rinse it off.
- Dress the tyres. Once the tyres are clean and dry, put a little Midnight Rubber Tyre Gel on the Tyre Pro Applicator and work it evenly around the tyre wall. Leave it to dry for a semi-gloss look, or wipe it over with a microfibre cloth for a natural finish.
About acidic wheel cleaners
The Wheely Good is an acidic wheel cleaner. The label describes it as safe and versatile for all wheel types, and like any strong wheel cleaner it works best used exactly as directed: on cool wheels, one wheel at a time, 30 to 60 seconds, a brush, then a thorough rinse. Never let it dry on the wheel.
Why the purple?
Deep Purple Fallout reacts with iron from brake dust and turns purple where it's working. It's safe on painted surfaces too, so you can use it on the lower doors and bumpers where brake dust sticks.
Want to save a little? The Wheel & Tyre Kit bundles the wheel cleaner, iron remover, tyre gel and applicator. And if you'd rather brake dust rinsed straight off, ask us about coating your wheels when you book a ceramic coating.
Questions we get asked
Can I clean my wheels straight after a drive?
No. Wait until the wheels and brake discs are cool, and keep out of direct sun.
Do I really need a brush?
Yes. The cleaner loosens the brake dust in 30 to 60 seconds, and a brush lifts it out of the corners.
How do I know if I need an iron remover?
If your wheels still look dull or speckled after a wash, spray Deep Purple. If it turns purple, there was iron to remove.
Can I put tyre gel on wet tyres?
For the best result, apply it to clean, dry tyres.
Rather we did it?
Bring it to the studio
Detailing, paint correction, ceramic coating, PPF and window tint at our Ravenhall studio. Tell us about your car and we'll send you a quote.



