Cleanazfk studio

Looking after your new finish

Thanks for trusting us with your car. Here's how to keep it looking the way it did when you picked it up.

For studio customers

15% off your first online order

Join our email list for aftercare tips and studio-only offers, and we'll give you a code for 15% off the products we use on your car.

By signing up you agree to get our emails. Unsubscribe any time. One use per customer, products only (not kits).

Your aftercare rules

Sapphire Infinity ceramic coating

  • Wash regularly with a pH-neutral, coating-safe shampoo.
  • Use clean, high-quality wash mitts and drying towels.
  • Remove bird droppings, insects, tree sap and chemicals as soon as you can. Left too long, they can etch the paint and the coating.
  • No automatic brush or roller car washes.
  • No harsh chemicals, abrasive cleaners, polishes or compounds unless we've approved them.
  • Book your 6-month check-up and your annual maintenance service with us, each within its 30-day window. Both are required to keep your 10-year warranty valid.
  • Water beading dropped off? It's usually contamination, not coating failure. Book an inspection and decontamination before assuming the coating has failed.
  • Talk to us before anyone else polishes, corrects or repairs the paint.

Llumar paint protection film

  • Don't wash the car for the first 2 to 4 weeks. The film's adhesive needs this time to fully cure.
  • Book your post-install check 4 to 6 weeks after pick-up, then an annual inspection within 30 days of each anniversary. Both keep your 10-year workmanship warranty active.
  • Hand wash with a quality car shampoo and a soft, non-abrasive wash mitt, and dry with a clean microfibre towel.
  • Wash in the shade where possible, not in direct sun.
  • Never aim a pressure washer, steam or high-pressure water straight at film edges or seams.
  • No automatic or brush car washes, harsh chemicals, solvents, abrasive polishes or cutting compounds.
  • Remove bird droppings, insects, tar, tree sap and road grime as soon as possible to prevent staining.
  • Don't pick at, lift or try to fix a film edge yourself. Contact us instead.

Llumar window tint

  • Don't wind the windows down for the first 48 hours, so the film can bond to the glass.
  • Don't clean the tinted glass for the first 21 days while the film dries.
  • A slightly hazy look and small water bubbles are normal while it dries, usually gone within 21 days (longer in cold or wet weather). Still there after that? Contact us and we'll inspect it.
  • Clean with a mild ammonia-free glass cleaner, like our Streak Free Crystal Clear (or MEP Films Window Tint Cleaner and Protector), and a soft, clean microfibre cloth.
  • No abrasive cloths, brushes, scourers, powders or ammonia-based cleaners.
  • No stickers, tape or suction mounts on the film.
  • Take care with seat belts, cargo and sharp objects near tinted windows.

From your warranty certificate: keep it with your vehicle records. Questions, or time for a check-up or service? Book with us

Washing it from here

Wash it the safe way: snow foam first to lift the grit, then a two-bucket wash with a soft mitt, and dry it straight away with a drying towel. Clean the wheels first so dirty water never splashes on clean paint.

Every few washes, foam on SiO2 Ceramic Foam to keep the water beading.

What we use on your car

  • 20% offStep 3 · Protect
    SI02 Ceramic Foam Superior Protectant

    SiO2 Ceramic Foam Superior Protectant

    From $15.50From $12.40$15.50

  • 20% offStep 1 · Pre-wash
    Super Snow Foam Pre-Wash

    Super Snow Foam Pre-Wash

    From $9.50From $7.60$9.50

  • 20% offStep 3 · Glass
    Streak Free Crystal Clear Glass Cleaner

    Streak Free Crystal Clear Glass Cleaner

    From $8.50From $6.80$8.50